A+ Engineering Ltd, Carrickfergus

A+ Engineering Ltd Contact Details

028 9336 6516
33 Loughmourne Road
County Antrim
BT38 9AW

About A+ Engineering Ltd

For all your vacuum requirements look no further than A+ Engineering. A locally based company offering a very competitive service to the every day user of vacuum & compressed air systems.

Replacement parts for all makes of Vacuum pumps, compressors and vacuum boosters. With up to 50% savings on OEM selling prices.

A+ Engineering offers a wide range of products from a variety of manufacturers around the world who are market leaders in their field. Through an established network of suppliers we are in a position to offer the highest quality products for all your vacuum, compressed air and process pumping needs.

Manufacturers Covered


We offer more than 5000 different parts, for over 300 models of vacuum pumps produced by the major OEM worldwide:

Every part sold by A+ Engineering is guaranteed to meet or exceed OEM performance. We often re-engineer and improve the design of OEM parts, increasing the life of both the pump and the part while minimizing downtime.

Rigorous field testing ensures superior performance.

Compressor Spares

Clean your compressed air with any our coalescing, particulate or activated carbon filters. Our high quality offer removable elements with automatic float drains. (Remember, the condensate from your lubricated air compressors is considered hazardous waste, don’t forget to install those OIL/Water Separators to meet you local code).

Our Engineering Department has the ability to help you find the products for the types of applications that you are looking for. We understand the importance of providing you with a system that is efficient, reliable and cost effective. Our engineers will gladly assist you with any specification requests.

We supply quality replacement air compressor filters and air oil separators for the leading air compressed air filtration.

Air oil separators remove compressor lubricant from the compressed air stream. The compressor lubricant is returned to the oil sump and the compressed air continues to the air receiver.

A typical oil separator reduces the lubricant entrained in the compressed air to 2-3 ppm. Under normal operating conditions an oil separators service life is 4,000 to 6,000 operating hours. Air/ Oil separators are also called separators and demisters.

Service Workshop Services

In addition to providing and servicing a wide range of vacuum pumps such as Rotary Vane, Chemical, Dry Running, Roots Blowers & Vacuum Boosters, A+ Engineering also supplies and services Leak Detectors, total pressure gauges and valves as well as supplying a comprehensive range of vacuum fittings and filters.

Vacuum Pump Services
  • In-house / on-site repair or overhaul facility. All makes and models.
  • In-house / on-site repair of vacuum boosters.
  • Calibration of vacuum gauges.
  • Test reports with all pumps, leak detectors and valves.
  • Professional Vacuum Management Programme to prevent downtime.
  • 24 Hour emergency call-out.
  • Technical back up.
  • Spares on stock. Vacuum oils (various grades) on stock.
  • Fully trained Service Engineers.
  • Competitive labour rates.
  • Rapid response and quick turnaround.

Vacuum Spares

A+ Engineering is all too aware of the need to keep vacuum pumping equipment running efficiently and cost effective. Our range of vacuum spares are targeted towards the end user and the growing requirement to keep service costs to a minimum without sacrificing quality.

Industrial Blowers
Aplus Engineering is a specialist supplier of positive displacement blowers and continuously strive to improve the performance and reliability of our products.

We studied European market trends, which are shifting away from two lobe compressors to much more advanced designs like three lobe variations by Bora which feature a patented stem rotor geometry system. The main advantages of these systems can be seen below-

The 3 lobes blowers offer considerable usage’s advantages, versus the 2 lobes construction, in most applications because of:

Higher rigidity: rotor beam 8 times more rigid
Better balance: more even mass distribution
Higher discharge pressure: 2 dynamic seal points rotor/case
Lower pulsation: 6 cycles instead of 4 per shaft rotation
Lower efficiency losses: minimal sensitivity to back-pressure

New Pumps

A+ Engineering offers a solution for all your vacuum requirements through an established network of world leaders in pump design and manufacture. As we are not connected solely to one manufacturer this gives us the capability of offering the most effective solution to your requirements and also the best value for money in today’s competitive markets. We cater to all industries some of which are…

  • Aerospace
  • Baking
  • Car industry
  • Dairy industry
  • Electronics
  • Food production
  • Health & hospitals
  • Laboratories
  • Medical
  • Printing
  • Quarries Recycling
  • Sewage treatment
  • Vacuum forming
  • vacuum lifting
  • Woodworking industry

Reviews of A+ Engineering Ltd

Star Rating
Robert McCauley
A first class company that only delivers first class work on time and to a very high standard. I would highly recommend A+ Engineering.
A+ Engineering Ltd 5 out of 5 based on 1 ratings. 1 user reviews.

Location Map of A+ Engineering Ltd